Mud trucks Teplotex-Komplekt TS-565, TS-566, TS-567, TS-568, etc.

Sumpers perform the function of a water treatment plant and are used for pre-purification of water from mechanical impurities, suspended and floating particles.

The sumpers have the highest efficiency when they are installed in front of heat exchangers, clarifiers, before and after cooling towers, purifying water from scale, alluvial sand, petroleum products, microbiological sludge, etc.

Mud trucks are divided into:

• vertical GW;
• horizontal GG;
• subscriber (thermal points of the GTR);
• filters with magnetic insert FSM.

Sump subscriber

The subscriber sump is installed on the pipelines of the heating system, cold and hot water supply, in heating points and performs preliminary purification of incoming water from suspended particles and mechanical impurities. Subscriber sumpers are made with pipes for welding or on a flange connection.

• The sump is a subscriber. Technical description

Sump TS-569 thermal points

The sump TS-569, called the subscriber sump or the sump of the thermal points of the GTR, is installed in heating, cold and hot water supply systems and performs the function of a filter for preliminary coarse water purification from mechanical impurities and suspended particles. It has a flanged connection to the pipeline.

• TS-569. Technical description
• TS-569. Passport

Sump TS-568 vertical

Vertical sump trucks TS-568 (GV) perform the function of preliminary rough water purification from mechanical impurities and suspended particles. Sumpers of this type are manufactured with a welding connection.

• TS-568. Technical description

Vertical sump TS-567

Vertical sump trucks TS-567 perform the function of filters for pre-purification of water from foreign inclusions, mechanical impurities, suspended particles.

• TS-567. Technical description

Horizontal sump trucks TS-566, TS-565

Horizontal sump GG perform the function of preliminary purification of water from mechanical impurities and suspended particles.

The principle of operation of the horizontal sump is based on the precipitation of suspended particles from the water due to a change (sharp decrease) in the speed of its movement. With the increase of hydraulic resistance in the horizontal sump, periodic cleaning of the slurry chamber from accumulated dirt is required.

• TS-566. Technical description
• TS-565. Technical description